Table 4-3.
Characteristics
Test Ports (Front Panel)
Connector type: 7 mm
Impedance: 50 ohms nominal
Damage input level:’
Port 1:
Port 2:
Nominal operating power level:
Frequency
Nominal Operating
0.045
to 8
8
to 18
Nominal connector nut size: 20 mm
Recommended torque: 90 N-cm (8 in.-lb.)
RF Input Connector (Rear Panel)
Connector type: precision 3.5 mm female
Damage input level:
Source power levels for reference channel phase lock:
Minimum: -2
Maximum:
Nominal connector nut size: 8 mm
Recommended torque: Precision 3.5 mm 90 N-cm (8 in.-lb.)
SMA: 56 N-cm (5 in.-lb.)
1. Do not exceed
input to Port 1 or -10
input to Port 2 for proper operation.
Table 4-4.
and 8512A Power Requirements and Physical Characteristics
Operating Temperature:
0°C
to 55°C
Power:
or 240 10%
47 to 66 Hz line frequency
Dimensions:
460 mm X 133 mm X 609 mm (18.1 X 5.25 X 24 inches)
Weight:
17 kg (38 lb) net
HP
15 kg (33 lb) net
Table 4-5.
Recommended Equipment
Item
Critical Specifications
Recommended Model
Network analyzer
no substitute
HP 851
Controller
3
no substitute
HP 9000 series 200 or 300 with 1 Mbyte memory
Disc
compatible with controller
Multimeter
range: 0 to 50V
HP 3456A
Oscilloscope
50 MHz bandwidth
HP
1.0 = operation; P = performance test; T = troubleshooting
2. HP 8340 or 8341 or 8350 with plug-in. Refer to HP8510 INSTALLATION manual for additional information.
3. Not required for manual performance tests with HP 851 OA.
P
P
T
T
HP
Test Sets
Specifications