Figure 3-1 shows the accessories supplied with the
and 8512A test sets (except as noted in
Table 3-l). The accessories, with part numbers, are listed in the
section for both test sets.
NOTE:
Additional HP8510 system accessory information is located in the HP8510 manual set.
Calibration, Verification and Adapter Kits.
Hewlett-Packard offers several calibration kits suitable
for calibrating an
or 8512A when making error corrected measurements. Each calibra-
tion kit noted below includes a set of precision standards to calibrate an HP8510 system in the indicated
interface. Additional information is located in the
System and Documentation Overview
section of the
System Manual
and volume 1 of the
manual set.
Connector Type
3.5
mm
7mm
Type-N
3.5
to 7 mm
Calibration
Kit
Verification Kit
HP
HP
HP
HP 85051 B
HP 85054B HP 85055A
Adapter Kit
HP
1. These adapters attach directly to the 3.5 mm test ports.
RF Cables.
The HP 85131D 3.5 mm Test Port Return Cable Set is a pair of 21 inch long cables specified
from DC to 26.5
Typically it is used with the
One of the cables has 3.5 mm (f)
connectors, the other cable has one 3.5 mm (f) and one 3.5 mm (m) connector.
The
7 mm Test Port Return Cable is a single, 36 inch cable for measurements where the
device is connected directly to one test port. It is typically used with the
The cable has two
7 mm connectors. Its frequency range is DC to 18
Transistor Test Fixture Kit.
The
Transistor Test Fixture Kit (TTF) is a comprehensive
measurement system for testing and characterizing stripline packaged microwave transistors.
Although it has 7 mm connectors and a frequency range limited to 18
the TTF may be easily
adapted for use with the HP 85148. Please consult with your local HP Systems Engineer for specific
recommendations.
HP
Test Sets General Information
l-5