The supplemental characteristics listed in the following tables are intended to provide information
usseful in applying the instrument by giving typical, but non-warranted, performance parameters.
Table 4-2.
Characteristics
Test Ports (Front Panel)
Connector type: NMD-3.5 mm male
Impedance: 50 ohms nominal
DC bias: 500
40 VDC, maximum
Incident signal attenuation range: 0 to 90
in 10
steps
Damage input level:
CW RF’
Nominal operating power level:’
Frequency
Operating Level
0.045
to 8
8
to 20
0
Nominal connector nut size: 20 mm
Recommended torque: 90 N-cm. (8 in.-lb.)
RF Input Connector (Rear Panel)
Connector type: precision 3.5 mm female
Damage input level:
Source power levels for reference channel phase lock:
Minimum: 0
Maximum:
Nominal connector nut size: 8 mm
Recommended torque: 90 N-cm. ( 8
for precision
56 N-cm. (5 in.-lb.) for SMA
Do not 10
input for proper operation.
2. Available power in PRESET condition.
4-2
Specifications
HP
Test Sets