HelmPak Press Control
29
Users Guide
Downloading Recipe Settings
Press should be in safe position, and not operating, when a recipe is downloaded
Press the Select button next to the Job that is to be loaded, the Job number will appear in the job
selected box in the screen banner.
Press the Download to PLC Button
The Confirm Download message will appear.
If the Shutheight is different from the current setpoint, and Auto adjust is Enabled, the Auto Adjust
Confirmation message will appear on the HMI. If is did not appear verify Auto Adjust is enabled, and
download the job recipe again.
This screen will indicate the current position of the slide adjust Key switch.
Press Confirm if you wish to move the slide, you can press close to allow the slide to remain in its current
position.
While adjusting the “Auto Adjust in Progress” message will flash, once finished the “Auto Adjust
Complete” will appear.
