HEK MSHF, User Manual

Page: 58 / 84

ASSEMBLY AND ANCHORING
6-22 MSHF • 7295-026A
Fig.6-43 Adjusting lower striker plate
6.8 Checking and adjusting the lower
striker plates
For a two-mast construction, the striker
plates must be checked and if necessary,
adjusted.
1. Lower the highest placed unit until the
limit switch just touches the lower
striker plates.
2. Use the other unit to level the
platform.
3. Check that the limit switch just
touches the lower striker plate for this
unit.
4. If the lower striker plate does not
touch the limit switch, adjust the
position of the striker plate until it just
touches the limit switch.
5. Check the adjustment.