HEK MSHF, User Manual, Page: 56 / 84

ASSEMBLY AND ANCHORING
6-20 MSHF • 7295-026A
A fence (height 1.10 m / 43.3 in)
completely surrounding the
platform is compulsory. If the
distance between the platform
and the facade is 0.3 m - 0.5 m /
11.8 in - 19.7 in a fence with a
height of 0.7 m / 27.6 in can be
used. If the distance between the
platform and the facade is less
than 0.3 m / 11.8 in a fence is not
compulsory but in this case a
kick board with an height of
0,15m / 5.9 in must be fitted.
The platform extension must be in
accordance with specification prEN1495.
The platform extension must be fabricated
from a non-slip, easily cleaned material.
The extension must be self draining. The
width of any openings or gaps in the floor
must be sufficiently narrow that a ball with a
diameter of 15mm will not pass through.
The platform extension must be able to
withstand a static load of 200kg / 440 lb on
an square area of 0.1x0.1m / 0.4 x 0.4 inch
on the least favourable part of the floor
surface without causing any permanent
distortion.
1. Pull out the outriggers and secure
them with locking pins.
2. Cover the outriggers with planks.
3. Fix cross strips with a right-angle
profile to the underside of the
planking and secure them to the
outriggers.
4. Mount the anchor ramp to the
outriggers.
Fig.6-39 Anchor ramp
Fig.6-38 Outrigger platform extension