HEK MSHF, User Manual

Page: 33 / 84

TRANSPORT
4-3
MSHF • 7295-026A
4.2 Chassis drive unit
Moving the machine on its
chassis over public roads is not
permitted.
During movement there may be
no load on the platform.
1. Place the platform in the lowest
position.
2. Check that the tow bar is secured.
3. Insert the connector from the platform
in the socket on the switch box of the
chassis.
4. Connect the control cable from the
tow bar to the chassis.
5. The chassis can be repositioned by
pushing the knob (arrow) of the
required direction. The control
voltage can always be switched off by
pushing the emergency push-button.
After the chassis has been repositioned,
the red push-button must be pressed and
the connectors for the power supply and
controls withdrawn.
Fig.4-4 Switch box chassis
Fig.4-5 Control box chassis