HEK MSHF, User Manual

Page: 43 / 84

ASSEMBLY AND ANCHORING
6-7 MSHF • 7295-026A
4. Check that the locking pin for
securing the autolevel and the lower
striker plate are mounted.
5. Assemble the platform components
sequentially on both sides until the
desired length is attained. The
platform may not exceed the
maximum length.
6. Tighten the platform bolts until the
specified torque is applied.
7. The width of the platform can be
adjusted to fit the form of the façade.
See section 6.6.
8. Mount the steps and secure them
with locking pins.
9. Mount the fencing and secure it with
"hairpins".
10. Mount the gate and the cam for the
gate safety switch. The roller must fall
into the cam when the gate is closed.
Fig.6-12 Step
Fig.6-14 Fence
Fig.6-15 Gate safety switch
Fig.6-13 Autolevel locking pin