Heise PTE-2, Operation And Maintenance Manual

Page: 36 / 88

34
SECTION 15 f. vii Clear Internal Memory Storage
SECTION 15 f. vi. Export Datalogs to SD Card
Or
Press ESC to go back to “Select Datalog” screen and choose
another log to review.
The HHC contains a slot for a standard SD memory card.
When a card is installed Datalogs can be exported to the card
in .CSV (Comma Separated Values) files which are able to be
read by Microsoft Excel or other spread sheet software. One
.CSV file is generated per Datalog.
Datalog file name XXMMDDYY, XX= sequential number of
Datalog (01-64). Datalog name is generated by the HHC and is
not user programmable.
TO EXPORT DATALOGS
Press MENU key
Use DOWN or UP ARROW to highlight Datalog…
Press ENTER
Press DOWN or UP ARROW to highlight “Export to SD”
Press ENTER
“Exporting logs” screen will appear and remain on until transfer
operation is complete. When the export process is completed
successfully a message reading “Exported logs to SD” will
appear briefly before the HHC returns to Measurement Mode.
Datalogs will appear in a folder on the SD card labeled
DATALOGS.
If a new or formatted SD card is used the HHC will create the
file folder and deposit the logs there.
Note: if an SD card is not installed or if there is a problem
writing the Datalog to the SD card a warning message “No
SD card present” will be displayed. Check that the SD card is
installed properly in the slot and attempt to download again.
WARNING: This command PERMANENTLY DELETES ALL
Datalog FILES stored in the internal memory.
This process does not effect datalogs trans-
ferred to the SD card.
Press MENU key
Use DOWN or UP ARROW to highlight “Datalog…”
Press ENTER
Press DOWN or UP ARROW to highlight “Clear Internal Stor-
age”
Press ENTER
“Delete all logs?” screen will appear
SECTION 15 f. v. Review Datalogs Cont.
Datalo g
Manual/Auto…
Review data…
Set channel ta g s…
Export to SD
Clear internal stora g e
Ex p ortin g lo g s…
Ex p ortin g datalo g s to
SD card. This ma y take
a little while.