1 Safety Instructions and Related Symbols
2
Programmer PG 02
In this publication the Table of Contents is preceded by diverse instructions that
among other things serve to ensure safety of operation. It is absolutely imperative
that these hints be read and understood before commissioning or servicing the
installation.
1.1
Basic Safety Measures for Normal Operation
•
The installation may be operated only by authorized persons who have been duly
trained and who are fully acquainted with the operating instructions so that they are
capable of working in accordance with them.
•
Before turning the installation on please verify and make sure that
- only authorized persons are present within the working range of the engine;
- nobody will be in danger of suffering injuries by starting the engine.
•
Before starting the engine always check the installation for visible damages and make
sure it is not put into operation unless it is in perfect condition. On detecting any faults
please inform your superior immediately!
•
Before starting the engine remove any unnecessary material and/or objects from the
working range of the installation/engine.
•
Before starting the engine check and make sure that all safety devices are working
properly!
1.2
Basic Safety Measures for Servicing and Maintenance
•
Before performing any maintenance or repair work make sure the working area of the
engine has been closed to unauthorized persons. Put on a sign warning that
maintenance or repair work is being done.
•
Before performing any maintenance or repair work switch off the master switch of the
power supply and secure it by a padlock! The key must be kept by the person
performing the maintenance and repair works.
•
Before performing any maintenance and repair work make sure that all parts of engine
to be touched have cooled down to ambient temperature and are dead!
•
Refasten loose connections!
•
Replace at once any damaged lines and/or cables!
•
Keep the cabinet always closed. Access should be permitted only to authorized
persons having a key or tools.
•
Never use a water hose to clean cabinets or other casings of electric equipment!
