5 Configuring the Governor with the Hand Held Programmer
22
Programmer PG 02
The programmer's display is illuminated to ensure legibility in insufficiently
lighted environments.
5.2
The Control Panel
2nd
ENGINE
STOP
SAVE
DATA
GET
DATA
SEND
DATA
MASK
ON/OFF
PARAM
DISPLAY
FUNCT
CURVES
7
8
9
1
2
3
4
5
6
0
.
CE
NUMBER
ON/OFF
VALUE
+
PID
ERRORS
SPEED
DROOP
CLEAR ERR
ACT ADJ
ERASE ERR
END LIST
NEXT
LAST
+/-
×10
×10
1...
2000...
4000...
6000...
BEGIN LIST
-
ERASE BLK
ENTER
Figure 3: The Control Panel
The programmer's control panel is divided into several groups some of which are
distinguished by different background colors. In addition to their standard functions, a
number of keys are assigned a second function which is denoted by the blue legend and
activated by the topmost left key [2nd]. Keys exhibiting exclusively blue captions have no
effect unless in combination with the [2nd]-key.
5.2.1
The Standard Functions
PARAM
DISPLAY
FUNCT
CURVES
PID
ERRORS
SPEED
DROOP
These keys (background green) permit to switch
between the different lists (standard functions). In doing so, the last-selected list item is
kept in memory.
Example: If the parameter 10 SPEED_MIN1 had been accessed while working in the
parameter list (PARAM) and if after switching to the function list (FUNCT) any
parameters had been altered there, then on returning to the parameter list (PARAM) the
parameter 10 SPEED_MIN1 would be displayed again.
Note
