5 Configuring the Governor with the Hand Held Programmer
20
Programmer PG 02
5
Configuring the Governor with the Hand Held Programmer
SPEED_PICK_UP1
2001 1230 1/min
ERR_ACTUATOR_DIFF
0÷4095 on
2nd
ENGINE
STOP
SAVE
DATA
GET
DATA
SEND
DATA
MASK
ON/OFF
PARAM
DISPLAY
FUNCT
CURVES
7
8
9
1
2
3
4
5
6
0
.
CE
NUMBER
ON/OFF
VALUE
+
PID
ERRORS
SPEED
DROOP
CLEAR ERR
ACT ADJ
ERASE ERR
END LIST
NEXT
LAST
+/-
×10
×10
1...
2000...
4000...
6000...
BEGIN LIST
-
HEI NZMANN
Speed Governors
®
P R O G R A M M E R 2
ERASE BLK
ENTER
Figure 1: Hand Held Programmer
After connecting the hand held programmer to the governor's communication interface, the
parameters of the governor can displayed and altered. Any parameter may be selected
directly by its number or by using the arrow keys while moving through the lists. The
parameter value is altered either directly (by entering a value) or by increasing/decreasing
it step-by-step with the keys [+] und [-]. The parameters contained in the DISPLAY list
and numbered 2000 through 3999 are not subject to alteration since they represent
measuring and display values. The Programmer 2 also includes several additional features,
such as the capability of storing the governor's complete data set in its memory.
