Operation
13
Start-Up
12
Connect/disconnect power cord
The three-wire socket is firmly connected
to the unit.
The connection is at the rear side of the
unit.
✓
The ON/OFF switch is in the “Off
“position.
➜
Connect the power cord with a
grounded socket.
➜
Disconnect the plug if the unit is not
in use.
Operation
Switch rotation on and off
Switch rotation on and off: Hei-FLOW Value
Set speed
Speed is set via rotation knob.
✓
Unit is switched on.
✓
Required direction of rotation is
activated.
➜
Turn knob to set speed.
Start rotation
➜
Press rotation switch on the right side.
✓
Control light of rotation switch
illuminates.
✓
Pumping starts.
Stop rotation
➜
Press rotation switch on the left side.
✓
Control light of rotation switch powers
off.
✓
Pumping stops
Rotation on Rotation off
Rotation switch
Switch rotation on and off: Hei-FLOW Advantage, Hei-FLOW Precision
Caution:
Possible damage of device
If device sockets are not covered, fluids can get in contact with
Interface connectors. Penetrating fluids can lead to malfunctions of
interface connection and could initiate a short circuit.
Sockets at the backside of device must be covered at all times.
Close sockets with attached sealing cap or connect interface cable.
Summary of Contents for Hei-FLOW Advantage 01
Page 50: ...Service 98...
