Heidolph Hei-FLOW Advantage 01, Operating Manual

Page: 21 / 51

41
Disassembly and Storage Assembly
40
Cassettes and tubes: „Cassette large”
„Cassette large” is suitable for multi-channel pump head C 8 only!
➜ Mount suitable tubes to cassettes.
(see chapter „Technical data, Table
tubes”).
➜ Set tube size by moving slider to fitting
size.
➜ Mount Cassettes as described under
“Cassette small”.
➜ Pull slightly at both ends of tube to
prevent an eventual loop.
➜ Set tube pressure via adjustment knob
between figures 3 and 4 of scale.
„Cassette Large”
Tube size slider
Mount several pump
When operating several pumps simultaneously you can place up to 2 pumps on top of
each other.
➜ Position pump on top of each other in
a way that left and right sides as well
as back sides are aligned.
Disassembly and Storage
Dismantling, transportation and storage
Dismantling
Risk of injury!
While the unit is plugged in you might be at harm if the device is
accidentally switched to ON mode.
Prior to dismantling switch the unit off and pull the plug from the
electric socket. Ensure that the unit is not switched on again.
✓ The unit is switched off.
➜ Disconnect plug from power socket.
➜ Remove all vessels.
➜ Disassemble attachments.
Transportation and storage
➜ Store and transport the unit and its components only if they were emptied and
cleaned,
➜ Store and transport the unit and parts of unit in the original packing material or alter-
natively in an adequate container to prevent damages.
➜ Seal the packing carefully against unauthorized or mistaken opening.
➜ Store the unit in a dry and frost-free place.
Improper storage and transportation may result in damages to the
system and the mechanical components.
Avoid any kind of shocks during transportation.