Heidolph Hei-CHILL 3000, Operating Manual, Page: 26 / 120

Operation
26
Setting the setpoint offset
✓ The device is switched on.
➜ Select the submenu “Setup” /
“Control” / “Setpoint offset”.
➜ Use the arrow buttons to select one
of the presented options and confirm
your selection using the button
“Select” .
Difference setpoint / actual value
➜ Select the “Diff. set/actual value”
option to determine the upper and
lower limit for the setpoint offset.
➜ Confirm your changes using the button
“Select” .