Heidolph Hei-CHILL 3000, Operating Manual

Page: 17 / 120

Start-Up
17
Submenu for setting of values
✓ A cursor flashes under the currently set
value.
➜ Press the right
u
or left
t
arrow button
to select a number.
➜ Press the up
p
or down
q
arrow button
to change the number.
➜ Press the right
u
or left
t
arrow button
to select the next number.
➜ Confirm the entire value using the
button “Select” .
✓ The set value will be stored.
➜ Press the left
t
arrow button to return to the previous menu.
➜ Press the left softkey under “ESC” to return to the base menu.
If you press the "ESC" softkey without first confirming the value with
the Enter key, the changes will not be stored.
Softkeys
The softkeys always call up the function
displayed in the footer above.
✓ You are in a submenu.
➜ Press the left “ESC” softkey.
✓ You will be taken directly to the base
menu from any submenu.
➜ Press the right “Standby” softkey.
✓ The device will be switched immedi-
ately to the standby or the temperature
control mode from any menu.
Softkeys
With a few exceptions, the softkeys in each menu and submenu are
assigned the "ESC" and "Standby" functions.