HEIDENHAIN TNC 320 User Manual Download Page 7

Page: 7 / 581

TNC model, software and features

TNC 320 | User's Manual

HEIDENHAIN Conversational Programming | 3/2014

TNC model, software and features

This manual describes functions and features provided by TNCs as

of the following NC software numbers.

TNC model

NC software number

TNC 320

771851-01

TNC 320 Programming Station

771855-01

The suffix E indicates the export version of the TNC. The export

version of the TNC has the following limitations:

Simultaneous linear movement in up to 4 axes

The machine tool builder adapts the usable features of the TNC to

his machine by setting machine parameters. Some of the functions

described in this manual may therefore not be among the features

provided by the TNC on your machine tool.
TNC functions that may not be available on your machine include:

Tool measurement with the TT

Please contact your machine tool builder to become familiar with

the features of your machine.
Many machine manufacturers, as well as HEIDENHAIN, offer

programming courses for the TNCs. We recommend these courses

as an effective way of improving your programming skill and

sharing information and ideas with other TNC users.

User's Manual for Cycle Programming:

All of the cycle functions (touch probe cycles and

fixed cycles) are described in the Cycle Programming

User’s Manual. Please contact HEIDENHAIN if you

require a copy of this User's Manual. ID: 1096959-xx

Summary of Contents for TNC 320






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands

HEIDENHAIN TNC 320, User Manual

Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands