HEIDENHAIN TNC 320 User Manual Download

Page: 163 / 581

Tool data

5.2

TNC 320 | User's Manual

HEIDENHAIN Conversational Programming | 3/2014

163

Hiding or sorting the tool table columns

You can adapt the layout of the tool table to your needs. Columns

that should not be displayed can be hidden:

Press the

SORT/HIDE COLUMNS

soft key (fourth soft-key row)

Select the appropriate column name with the arrow key
Press the HIDE COLUMN soft key to remove this column from

the table layout

You can also modify the sequence of columns in the table:

You can also modify the sequence of columns in the table with
the "Move to" dialog. The entry highlighted in

Available columns

is moved in front of this column

You can use a connected mouse or the TNC keyboard to navigate in

the form. Navigation using the TNC keyboard:

Press the navigation keys to go to the input fields.

Use the arrow keys to navigate within an input

field. To open pop-down menus, press the GOTO

key.

With the Fix number of columns function, you can

define how many columns (0 -3) are fixed to the left

screen edge. These columns are also displayed if you

navigate in the table to the right.

Summary of Contents for TNC 320






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands

HEIDENHAIN TNC 320, User Manual

Search results

Summary of Contents for TNC 320

Reviews:

Related manuals for TNC 320

Brands by name

Popular brands