HEIDENHAIN TNC 320, User Manual

Page: 515 / 581

Ethernet interface 16.11
16
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
515
Press the Configuration button to open the Configuration
menu:
Setting Meaning
Status
Active interface : Connection status of
the selected Ethernet interface
Name : Name of the interface you are
currently configuring
Plug connection: Number of the plug
connection of this interface on the logic
unit of the control
Profile
Here you can create or select a profile in
which all settings shown in this window are
stored. HEIDENHAIN provides two standard
profiles:
DHCP-LAN : Settings for the standard
TNC Ethernet interface, should work in a
standard company network
MachineNet : Settings for the second,
optional Ethernet interface; for
configuration of the machine network
Press the corresponding buttons to save,
load and delete profiles
IP address
Option Automatically procure IP
address : The TNC is to procure the IP
address from the DHCP server
Option
Manually set IP address : Manually
define the IP address and subnet mask.
Input: Four numerical values separated by
points, in each field, e.g.
160.1.180.20
and
255.255.0.0
Domain Name
Server (DNS)
Option Automatically procure DNS : The
TNC is to automatically procure the IP
address of the domain name server
Option
Manually configure DNS : Manually
enter the IP addresses of the servers and
the domain name
Default
gateway
Option Automatically procure default
GW : The TNC is to automatically procure
the default gateway
Option
Manually configure default GW :
Manually enter the IP addresses of the
default gateway
Apply the changes with the
OK
button, or discard them with the
Cancel button