Commissioning | Configuring the axes
7
ACF schema
The ACF file contains the nominal values of the supporting points on the X and
Y axes. The nominal values have been corrected by the deviations from the
calibration standard.
The following example shows a grid of 5 x 5 supporting points with a spacing of 25
mm on the X axis and 20 mm on the Y axis, oriented along the X axis.
Example
MM
X
25.0
20.0
5
5
0.0000
0.0000
25.0012
-0.0010
50.0003
-0.0006
75.0010
0.0016
100.0021
0.0000
0.00005
20.0020
25.0013
20.0021
50.0013
20.0022
75.0005
20.0023
99.9996
20.0003
-0.00010
39.9998
24.9981
39.9979
49.9999
40.0001
75.0004
40.0021
100.0019
40.0008
0.00003
59.9992
25.0000
60.0018
50.0001
60.0003
75.0020
59.9990
100.0001
60.0001
-0.00003
80.0021
24.9979
80.0004
50.0020
79.9991
75.0001
79.9985
100.0010
80.0002
100
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
Summary of Contents for GAGE-CHEK 2000 Series
