HEIDENHAIN GAGE-CHEK 2000 Series, Operating Instructions Manual

Page: 198 / 236

Settings |
Axes
11
Parameter Explanation
Incremental signal Signal of the connected encoder
Settings:
1 Vpp
: Sinusoidal voltage signal
11 µApp : Sinusoidal current signal
Default value: 1 Vpp
Encoder model Connected encoder model
Settings:
Linear encoder
: Linear axis
Angle encoder : Rotary axis
Angle encoder as linear encoder : Rotary axis is displayed as
linear axis
Default value: Depending on the connected encoder
Signal period For linear encoders
Length of a signal period
Setting range: 0.001 µm ... 1000000.000 µm
Default value: 20.000
Line count For angle encoders and for display of a rotary axis as a linear
axis.
Number of lines
Setting range: 1 ... 1000000
Default value:
1000
Teach sequence Starts the teach sequence for determining the Line count for an
angle encoder based on a specified angle of rotation.
Display mode For angle encoders and for the display of a rotary axis as a linear
axis.
Settings:
- ∞ ... ∞
0° ... 360°
-180° ... 180°
Default value:
- ∞ ... ∞
Mechanical ratio For display of a rotary axis as a linear axis:
traverse path in mm per revolution
Setting range: 0.1 mm ... 1000 mm
Default value: 1.0
Reference marks Configuration of the Reference marks
Further information: "Reference marks (Encoder)", Page 201
Analog filter frequency Frequency value of the analog low-pass filter
Settings:
33 kHz : Suppression of interference frequencies above
33 kHz
400 kHz : Suppression of interference frequencies above
400 kHz
Default value:
400 kHz
198
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020