15
Heat & Glo • LUX36, LUX42 Installation Manual
•
• 2287-980 Rev. L
2287-980 Rev. L • 4/16
Figure 3.9 Non-Combustible Hearth Extension Dimensions
MODEL
A
B
in.
mm
in.
mm
LUX36
12
305
57-1/4
1454
LUX42
12
305
63-5/16
1608
A
B
NON-COMBUSTIBLE
NOTICE: DO NOT
install a hearth that is greater than
one inch thick. Hearth will interfere with installation of
glass assembly. Total hearth height must not exceed one
inch from bottom of appliance when appliance is installed
directly on
fl
oor (including mortar, backer material, etc.)
NON-COMBUSTIBLE
HEARTH EXTENSION
1 IN. THICK MAX.
NON-COMBUSTIBLE
BOARD
HEARTH CLEARANCE
BRACKET
WOOD OR OTHER COMBUSTIBLE
FLOOR OR PLATFORM
Figure 3.10 Appliance Installed on Combustible Surface
Non-Combustible Hearth Extension REQUIRED.
NON-COMBUSTIBLE
BOARD
HEARTH CLEARANCE
BRACKET
WOOD OR OTHER COMBUSTIBLE
FLOOR OR PLATFORM
4 IN.
3 IN. MIN.
BOTTOM OF
FIREPLACE
1/2 IN. MAX.
THICKNESS
COMBUSTIBLE
BUILDING
MATERIAL
Figure 3.11 Appliance Raised a Minimum of 3 Inches Above
Combustible Surface.
Non-Combustible Hearth Extension NOT REQUIRED.
D. Hearth Extension
WARNING! Risk of Fire!
Non-combustible hearth exten-
sion may be required when appliance is installed on com-
bustible surface.
• Hearth extension must be non-combustible and
serves to protect combustible
fl
oors in front of appli-
ance. See Figure 3.9 and Figure 3.10.
• The base of the
fi
replace may sit on a combustible
surface. See Figure 3.9. The area in front of the
appliance must be protected by a non-combustible
hearth extension, unless the appliance is raised a
minimum of three inches above the combustible
fl
oor
or hearth. See Figure 3.9 and Figure 3.10.
• If a hearth greater than one inch in thickness is de-
sired, the appliance must be raised by the equivalent
height to ensure that the hearth extension does not
interfere with the installation of the glass assembly
required for
fi
replace operation. See Figure 3.9.
