31
Heat & Glo • LUX36, LUX42 Installation Manual
•
• 2287-980 Rev. L
2287-980 Rev. L • 4/16
C. Non-Combustible Material Installation
WARNING! Risk of Fire!
• Follow these instructions exactly.
• Facing materials must be installed properly to prevent
fi
re.
• No materials may be substituted without authorization
by Hearth & Home Technologies.
• The
fi
nishing templates are shipped fastened to the top
surround. Remove
fi
nishing templates prior to installing
non-combustible board.
• The factory-supplied non-combustible material is shipped
in front of the applance in a large, protective cover. See
Figure 6.1.
• Install lower left and right non-combustible legs and top
non-combustible with screws supplied in the manual bag
assembly. See Figure 6.6.
• Use fasteners from fastener packet (in manual bag) for
screws that secure to the
fi
replace. See Figure 6.6.
• Use regular sheetrock screws or nails to secure the
perimeter of the non-combustible facing materials to the
wood framing. See Figure 6.6.
• Use a wet or dry towel or soft brush to remove dust or
dirt from facing material.
• See Section 10 for
fi
nishing materials guidelines.
INTERIOR:
SECURE WITH
SELF-TAPPING SCREWS
(IN MANUAL BAG
ASSEMBLY)
PERIMETER:
SECURE TO FRAMING
WITH DRYWALL
SCREWS OR NAILS
Figure 6.6 Installing Non-Combustible Facing Material
