HBM Quantum X MX403B, Operating Manual

Page: 162 / 416

MX809B operation
46
A3757-2.2 HBM: public
MX809B
5.5 Status display
The front panel of the measurement module has one sys­
tem LED and eight channel LEDs. The system LED indi­
cates the status of the device, the channel LEDs the
states of the individual channels.
System LED Eight connector LEDs
System LED
Green Error-free operation
Orange System is not ready, boot procedure running
Flashing orange Firmware download active, system is not ready
Red Error
Connector LEDs
All LEDs are orange Boot procedure running (system is not ready)
All LEDs are flashing orange Firmware download active (system is not ready)
Green Error-free operation
Flashing orange (5 s), then
green Manual configuration running
Red Thermocouple mode: sensor break
Voltage mode: overloaded
Channel error (incorrect parameterization, connection
error)