HBM Quantum X MX403B, Operating Manual

Page: 151 / 416

MX809B operation
MX809B
A3757-2.2 HBM: public
35
The minimum bending radius of the measuring lead is
twenty times the outside diameter. Avoid kinking the
measuring lead.
Do not route the leads through traffic ways.
Make sure that the measuring lead is not exposed to
unacceptable mechanical stress.
Do not run the measuring lead through environments that
are too hot or too cold, or to or on surfaces that are out­
side the the permitted temperature limits.
The measuring leads must not come into contact with
chemically aggressive media.
The maximum permissible length of the measuring lead
is 30 m.
The measuring lead must not run through outdoor areas,
either in full or in part.
Avoid long-term exposure to the effects of direct sunlight.
Do not expose the measuring lead to radioactive radia­
tion.
The measuring lead is rated for direct atmospheric pres­
sure at an altitude of 0 m to 2000 m. It must not be used
in a vacuum or under gage pressure.
DANGER
Risk related to electric shock and other hazards:
Risks can arise if the way in which the measuring lead is
routed puts the lead under unacceptable stress.