HBM Quantum X MX403B, Operating Manual

Page: 140 / 416

Accessories
24
A3757-2.2 HBM: public
MX809B
4.2 General QuantumX accessories
Article Description Ordering num­
ber
AC/DC power supply /
24 V Input: AC 100 ... 240 V (
"
10%),
1.5 m cable
Output: DC 24 V, max. 1.25 A,
2 m cable with ODU plug, meets the
requirements of IEC 60950­1 for a SELV
supply.
1-NTX001
Cable - QuantumX
supply 3 m cable for voltage supply of QuantumX
modules; suitable plug (ODU Medi-Snap
S11M08-P04MJGO-5280) at one end and
exposed wires at the other. 1-KAB271-3
Ethernet crossover
cable Ethernet crossover cable for direct opera­
tion of devices on a PC or notebook, length
2 m, type CAT5+ 1-KAB239-2
IEEE1394b FireWire
cable
(module-to-module) FireWire connection cable between
QuantumX modules, fitted with suitable
plugs on both ends; lengths 0.2 m/2 m/5
m. Note: voltage can also be supplied to
the QuantumX modules via the cable (max.
1.5 A, from source to last acceptor). 1-KAB272-0.2
1-KAB272-2
1-KAB272-5
IEEE1394b FireWire
IEEE ExpressCard FireWire IEEE 1394b ExpressCard (Ex­
pressCard/34) for connecting QuantumX
modules to a notebook or PC 1-IF002
IEEE1394b FireWire
cable PC to module,
IP20/IP68 FireWire connection cable from measure­
ment modules to PC. Fitted with suitable
plugs at both ends. Length: 3 m.
Module voltage supply not possible via
KAB293.
1-KAB293-5
IEEE1394b FireWire
cable hub to module,
IP68 FireWire connection cable between HUB
and module. For data transfer from Quan­
tumX or SomatXR modules to HUB. Fitted
with suitable plugs at both ends. Length: 3
m. 1-KAB276-3