Hawkeye Mfg RG1300, Installation Manual

Page: 39 / 60

CHAPTER
6
016-0171-655 Rev. E 35
CHAPTER 6
CHASSIS CABLE INSTALLATION
CHASSIS CABLE ROUTING AND CONNECTION
BEST PRACTICES AND RECOMMENDATIONS
• Do not connect battery leads until all cables are installed and connected.
• Route chassis cabling along existing cabling or plumbing to help avoid pinch points or stretching the cable
during normal equipment operation.
ELECTRICAL BOX CONNECTIONS
1. Locate the single, round connector on the supplied chassis cable (P/N 115-7303-310).
2. Route this connector to the electrical box and connect to the Hawkeye
®
bulkhead cable receptacle secured
previously.
3. Connect the chassis cable to the round receptacle on the Product Controller II ECU cable already installed in the
electrical box.
FIGURE 1. Chassis Cable Electrical Box Connection