Hatteland HT C02HI STC series, User Manual

Page: 90 / 102

Pinout Assignments
90
IND100241-18
Appendix
10+10 pin Isolated Digital Input/Output Module
Type Number “PCA100297-1”
Module A Module B
Module A Module B
A1 External Power + A1 IN+[0]
A2 N/C (Not Connected) A2 IN-[0]
B1 External Power - (GND1) B1 IN+[1]
B2 N/C (Not Connected) B2 IN-[1]
O1 HS[0] O1 N/C
C1 HS[1] C1 IN+[2]
C2 N/C (Not Connected) C2 IN-[2]
D1 HS[2] D1 IN+[3]
D2 N/C (Not Connected) D2 IN-[3]
O2 HS[3] O2 N/C
3 x 3.5mm (TRS) Jacks (Line in, Line Out, Mic In)
+ 9-pin Amplifi ed Mono/Stereo Audio Out, DSUB Female
Type Number “VSD100897-1” (PCI Metal Bracket)
Line Out Line In Mic In
6 7 8 9
1 2 3 4 5
3 x 3.5mm (TRS) Jack Specifi cation / Connection:
PIN 01 TIP
Left-hand channel for stereo signals,
positive phase for balanced mono signals,
signal line for unbalanced mono signals.
PIN 02 RING
Right-hand channel for stereo signals,
negative phase for balanced mono signals,
power supply for power-requiring mono
signal sources.
PIN 03 SLEEVE Useally ground (GND)
9-pin DSUB FEMALE:
PIN 01 AMP_L- Left Audio Return*
PIN 02 AMP_L+ Left Audio*
PIN 03 AMP_R- Right Audio Return
PIN 04 AMP_R+ Right Audio
PIN 05 N/C No internal connection
PIN 06 N/C No internal connection
PIN 07 N/C No internal connection
PIN 08 N/C No internal connection
PIN 09 N/C No internal connection
*For Mono: connect pin 01 and 02 only
2 x 5-pin PS/2 Mouse and Keyboard
Type Number “VSD100896-1” (PCI Metal Bracket)
Mouse Keyboard
5-pin PS/2 MOUSE Female
Pin 1: Mouse Data
Pin 3: Ground
Pin 5: Mouse Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
5-pin PS/2 KEYBOARD Female
Pin 1: Keyboard Data
Pin 3: Ground
Pin 5: Keyboard Clock
Pin 2: Not Connected
Pin 4: Vcc +5V
Pin 6: Not Connected
10+10 pin RS-422 / RS-485 NMEA Module
Type Number “PCA100293-1”
6 7 8 9 10
1 2 3 4 5
6 7 8 9 10
1 2 3 4 5
PIN 01 TxD- Transmit Data Negative
PIN 02 TxD+ Transmit Data Positive
PIN 03 GND Isolated Ground
PIN 04 RxD- Receive Data Negative
PIN 05 RxD+ Receive Data Positive
PIN 06 TxD- Transmit Data Negative
PIN 07 TxD+ Transmit Data Positive
PIN 08 GND Isolated Ground
PIN 09 RxD- Receive Data Negative
PIN 10 RxD+ Receive Data Positive
RS-485 Half Duplex (2-wire) Confi guration:
Connect TX and RX pair-wise:
TX- to RX-, TX+ to RX+.
*Note: The jumper for “force of transmitter” is
open by factory default. For some custom
models this jumper is preset to closed (active),
in that case unit has to be opened and jumper
set to open to allow Half Duplex mode.