Hatteland HT C02HI STC series, User Manual

Page: 23 / 102

23
IND100210-29
General Installation Recommendations
Installation
HT 00229OPT-A1 (PCI / PCIe Card Bracket, Removal & Replacement) HL/FH
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK
models.
For Half Length (HL) and Full Height (FH) - PCI / PCIe cards
1: Place the bracket as shown and push/slide it to reach
the end of the card and click in place at the end of the
card.
2: Mount 2 x M3x6mm Countersunk screws on top to
fasten the bracket securely. Use a Pozidriv #2
screwdriver.
HT 00229OPT-A1 (PCI / PCIe Card Bracket, Removal & Replacement) HL/HH
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK
models.
For Half Length (HL) and Half Height (HH) - PCI / PCIe cards
1: Place the bracket as shown and fasten it with
2 x M3x6mm Countersunk screws on the top.
Use a Pozidriv #2 screwdriver.
2: Notice the screw at the end of the bracket. By turning
this clockwise using your fingers the support piece will be
pulled downwards and towards the edge of the card, thus
making it secure. Use a fair amount of force to fasten it.