Hatteland HT C02HI STC series, User Manual

Page: 22 / 102

22
IND100210-29
General Installation Recommendations
Installation
PCI / PCIe Card removal / replacement - Introduction
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK
models.
1: Unscrew 2 screws on each side of the top bracket.
Use a Pozidriv #2 screwdriver.
2: Push each side of the top bracket, one forward and one
backwards in a 45 degree rotation clockwise to slide it out
of the tracks. Then lift up the top bracket to remove it.
PCI / PCIe Card removal / replacement - Full Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK
models.
1: Unscrew 1 screw to loosen the chosen PCI / PCIe
card bracket from the cabinet as indicated.
Use a Pozidriv #2 screwdriver.
2: Remove or insert the desired PCI / PCIe card into the
slot. Make sure you do not force the card down, it
should be mounted with a firm grip with two hands and
performed in a straight up or downwards motion.
Repeat the procedure backwards to finalize operation.