29
IND100210-26
General Installation Recommendations
Installation
Front Fan removal / replacement
Note: Areas of interest are marked in this section with circles and arrows in
RED
color. Please disconnect ALL
cables from the computer unit before proceeding! Procedure applies for HT C02H, HT C02HI and HM C02HK
models.
1: Remove cabinet cover (see beginning of this chapter)
Then unscrew 4 screws from the fan/filter cover in
front of the unit. Use a Pozidriv #2 screwdriver.
2: Gently pull out the fan/filter cover.
3: Unscrew 1 screw on top that keeps the Air Filter
Bracket in place. Use a Pozidriv #2 screwdriver.
4: Gently pull up the Air Filter Bracket.
5: Unscrew 4 screws that keeps the fan in place.
Use a Pozidriv #2 screwdriver.
6: Lift/slide the fan up from the unit.
Repeat the procedure backwards to finalize operation.
Summary of Contents for HT C02HI STC series
