Hatteland HT C02HI STC series, User Manual

Page: 33 / 102

33
IND100210-36
General Installation Recommendations
Installation
5: Locate CMOS battery as indicated near the smallest
PCI-E slot (just above it).
6: With a finger/nail, push the metal clip inwards as
indicated (1) and the battery will pop up automatically (2).
1
2
7: Carefully grab the battery with finger/nail and remove
it from the holder.
8: Place the NEW battery as aligned in the lower part
first. Viewed in opposite direction below.
8: Finally push the battery down with thumb/finger (1) until it is reseated flat vertically and a metallic click sound is
heard (2).
1
2
Repeat the procedure backwards to finalize operation (step 4 to 1).