Hatteland HD 15T22 MMD-xxx-F series, User Manual

Page: 71 / 156

71 User Controls
OSD Menu Functions
IND100064-55
|---2---
Management Settings - Power Plan *Available in "Advanced" only
This setting will allow to control the power mode of USB/VGA out and Ethernet port in Power off
mode.
Settings as follows for "VGA Out/USB in Off Mode":
"Enable" = Enabled in power off mode.
"Disable" = Disabled in power off mode.
● Note: Factory Default set to "Disable"
Settings as follows for "LAN in OFF/Sleep Mode":
"Enable" = Enabled in power off mode.
"Disable" = Disabled in power off mode.
● Note: Factory Default set to "Enable"
|---2---
Management Settings - Touch Power Enabled *Available in "Advanced" only
This setting will allow to filter the signal processing from touch screen to reach the computer.
For instance, if user only want touch screen to be active when DisplayPort signal is defined as Main
Input, but disallow touch screen processing on other signal inputs, the non-touch screen enabled
signal inputs would require the user to operate elements on screen either with keyboard, mouse or
just for information purposes only with no user interaction possible via touch screen.
Settings as follows:
"Always Active" = Touch is always enabled, even if there is no image on screen.
Display unit may be powered off, but require power cable connected
as well as a powered on computer. Signals from touch screen will
still reach the computer.
"Any signal is On" = Touch is enabled when any input is active as Main Input.
"Select signal is On" = Following list and Choices available:
"Digital 1" = Touch is enabled only when DVI 1 is active as Main Input.
"Digital 2" = Touch is enabled only when DVI 2 is active as Main Input.
"Analog RGB 1" = Touch is enabled only when VGA is active as Main Input.
"Analog RGB 2" = Touch is enabled only when VGA is active as Main Input.
"Composite 1" = Touch is enabled only when Composite 1 is active as Main Input.
"Composite 2" = Touch is enabled only when Composite 2 is active as Main Input.
"Composite 3" = Touch is enabled only when Composite 3 is active as Main Input.
"DisplayPort" = Touch is enabled only when DisplayPort is active as Main Input.