Hasselblad CFV, User Manual

Page: 26 / 92

26
Winder CW
The Winder CW is a compact, economically designed unit providing not only a motor drive
facility but also a comfortable and robust grip.
It features single exposure, continuous exposure as well as multi-exposure modes. Remote
control is achieved by a simple release cord or by the unique infrared transmitter − the
Hasselblad IR Remote control. Both provide considerable freedom, with the IR Remote
control offering an extra remote mode choice facility. Each winder is governed by a unique
code from the IR Remote control so there is no risk of controlling other cameras uninten-
tionally. However, one IR Remote control can control several cameras at the same time if
desired. As the winder is set close to the camera body, it produces stability and balance
for optimum hand held efficiency.
Requires an ‘Exposure Cable 503’ when used with a CFV. See
MENU > SETTINGS > Camera
for use.
Please visit the Hasselblad website − www.hasselblad.com − for details of the com-
plete range of accessories and lenses.
There are a number of discontinued accessories for the V-system on the used market
but please check for compatibility.
Film magazine
The Magazine A12 produces 12 frames with 120 film (6x6 cm) and is available in chrome.
Close-up accessories
Four fully automatic extension tubes are available for close-up work. With the exception
of Extension tube 8, which cannot be connected directly to the 200-series cameras, they
also feature a data bus coupling to transfer data from the lens to the exposure metering
system of the camera.
Professional lens shade
The Proshade 6093T (3040739) provides the ultimate in flare and stray light reduction. It is
particularly useful if you have a number of lenses as it fits virtually all lenses in the range.
It is supplied with a Proshade mask 6093/250 (3040312) which provides further control
for longer lenses when the Proshade is fully extended. The Proshade also functions as a
gelatine filter holder.
Tripod quick-coupling
The coupling plate on the bottom of the camera body has both a 1/4 in. and a 3/8 in. tripod
thread. It also fits the useful and reliable Hasselblad Tripod Quick-Coupling (3043326). This
facilitates rapid and repeatedly accurate attachment and removal of the camera from a
tripod or support.