8
Model 450T (continued)
1. Locate parts bag 8.
2. Locate the two mounting holes as shown in Figure 1.
3. Connect the pump plate mounting bracket (001-4646C), shown in Figure 2, using two 3/8 x 1
1/4 bolts, nuts, locks, and flat washers to the saddle.
4. Attach the pump plate holder (001-4646D) to pump plate mounting bracket (001-4646C) using
four 3/8 x 3/4 flange head bolts. Figure 3.
Hose Manifold Model 444T, 445T & 450T
Mount the hose manifold on the front of the baler in the area of the spray shield. Make sure the
bracket will not interfere with any baler operations.
Mount support bracket
(001-4424C) at these
locations. Two tie
models only.
Figure 1
Figure 2
Figure 3
AGCO & CASE INLINE BALERS
NEW HOLLAND & CASE SBX
WITH 4409 INSTALL KIT
Hose
manifold
Hose
manifold