6
Model 445T
Mount the unit on the diagonal frame behind the twine box, as pictured using the base clamp (001-4406) and
u-bolts (001-4406A). Locate the top reach rod (Figure 1) in a position opposing the overhanging tank. Bolt
one end to the top stub pipe on the tank saddle and the other end to a secure location on the baler (figure2).
NOTE: REACH RODS MAY HAVE TO BE BENT ON THE TAB TO ALIGN PROPERLY.
A. Recommended Mount
Locate parts bag 8. The U shaped bracket (001-4647) will already be attached to the saddle and will need
to be inverted to fit on the bottom of the saddle as shown in Figure 3. Reattach the bracket to the bottom of
the saddle using the four 1/4 x 1 bolts, nuts, flats and lock washers. Connect the pump plate mounting
bracket (001-4646C), shown in Figure 4, using two 3/8 x 1 1/4 bolts, nuts, locks, and flat washers to the U
shaped bracket (001-4647). Install the rest of the pump plate as shown in Figure 5. Attach the pump plate
holder (001-4646D) to pump plate mounting bracket (001-4646C) using four 3/8 x 3/4 flange head bolts.
Figure 3
Figure 4
Figure 1
Figure 2
Figure 5