14
Install Kit 4416B
On baler tongue above center of the baler (figure 1), install spray shield holders (001-4424B) on both sides of
tongue using pre-drilled holes (figure2). Securing each wit
h one 3/8” bolt. Do not tighten bolts. Place the spray
shield (001-4424A2) on the shield
holders using two 3/8” bolts, washers, lock and nuts. Spray shield should
spray toward back of pickup, between augers, in area before crop enters baler (figure 3). When angle of tips is
correct, tighten shield holder bolts. Route hose to hose manifold.
Figure 1
Figure 2
Figure 3