Harris Legacy 99-1300-0, Operation & Technical Manual

Page: 92 / 98

Revision B • 1/03
H A R R I S C O R P O R A T I O N
5-2
5 Accessories
PERIPHERAL PANELS
These panels allow the console opera-
tor to control other equipment without
turning away from the console. Available
drop-in panels include the Telos Desk-
top Director and Switch Console, sev-
eral digital delivery system controllers,
a delay unit controller, and a tape re-
mote. Some of these require Divider Kits
(see page 2-2) when mounting into the
blank panel areas at either end of the
mainframe.
MIC REMOTE PANELS
Four mic remote control panels are
available for the Legacy. The basic panel
is the PRE99-1197, with On, Off, and
Cough buttons. The PRE99-1198
(shown in the cabinet plate example on the previ-
ous page) adds a Talkback button to the three
basic panel buttons. A simplified schematic, and
connection information, for these panels is shown
on page 5-3.
The PRE99-1199 Mic Control panel (shown in
the turret example above) is designed for a host
or co-host. It has the standard On, Off, Cough,
and Talk to Control Room buttons, but also adds
four additional Talk buttons that can be config-
ured for talking to the studio, directly to a host
and a co-host, and with an external location.
The PRE99-1210 Group Mic Controller (shown
in the turret example) is used in a studio where
separate guest mic control panels are not installed.
The panel gives a host On/Off control for up to
six microphones from a single 1.6" panel.
HEADPHONE DISTRIBUTION AMP
The PRE99-1215 Headphone Amp has six out-
puts for one Host and up to five Co-Hosts or
Guests. The three inputs to the amp come from
the Host, Co-Host, and Guest outputs (from
either a Control Room or a Studio module).
Headphone levels are digitally controlled
through the PRE99-1214-series headphone
panels. Headphone panels are available with and
without a volume control pot. Those without a pot
are designed to work with the Headphone fader
controller (shown in the dual cabinet plate ex-
ample on the previous page).
Existing headphone panels, which use a pot to
directly control the amplified level, can also be
used with the PRE99-1215 amplifier.
LOGIC WIRING DIAGRAMS & CABLES
To assist in logic cable design and construction,
Harris’ Technical Services Department can
supply logic wiring diagrams for many popular
peripheral devices (see page 4-1 for contact info).
To assist in installation, Harris also offers pre-
made peripheral logic cables for many popular
devices. For availability and pricing, contact a sales
representative.
PRE99-1213 TURRET APPLICATION EXAMPLE
T I M E R C L O C K
RESET
HOLD STOP
START
AUTO
PRE99-1211 TURRET CLOCK & TIMER
OFF
O N
MIC
1
MIC
2
MIC
3
MIC
4
MIC
5
MIC
6
STUDIO MONITOR SELECTOR DUAL FADER MIC REMOTE BLANK PANEL GROUP MIC BLANK PANEL 4-BUTTON DIGITAL
PRE99-1190 PRE99-1192 PRE99-1199 PRE99-1714-3 PRE99-1210 PRE99-1714-3 PRE99-1195
TELCO
REC
EXT
1
TELCO
MON
EXT
2
SEND
EXT
3
EXT
4
PGM
1
PGM
2
PGM
3
PGM
4
STOP
END
PLAY
FADE
& GO
KILL
DELIVERY SYSTEM
PANEL
CONTROL PANEL WITH 5 TALKS
OFF
O N
C O U G H
TALK TO
CONTROL
TALK
1
TALK
2
TALK
3
TALK
4