Harris Legacy 99-1300-0, Operation & Technical Manual

Page: 80 / 98

Revision B • 1/03
H A R R I S C O R P O R A T I O N
3-12
3 Operation
AU TO CUE — When lit, and Cue is active, feeds Cue to the operator headphone
output (how it is fed is set by DIP switch 1, see page 2-33 for details). When unlit, the
Cue does not affect the Operator headphones.
FADERS
This section controls the monitor and headphone output levels.
MONITOR FADER — 100mm fader to adjust the level of the Control Room
monitor speakers. It controls the level of the Monitor output.
HEADPHONE FADER — 100mm fader to adjust the level of the console
operator’s headphones. It controls the level of the Operator output.
CONTROL ROOM
This section selects which audio signals are sent to the various Control Room outputs.
Multiple sources can be selected, by pressing and holding one button while additional
buttons are pressed. There is no limit to the number of analog sources (the four
Externals and two Telcos) that can be selected, but only two digital sources (the Send
and the four Programs) can be selected simultaneously.
EXT 1, EXT 2, EXT 3, EXT 4 — When lit, assigns External 1, 2, 3, or 4 to
the Control Room outputs.External inputs are an analog source
SND— When lit, assigns the Send bus to the Control Room outputs. The Send
bus is a digital source.
PGM 1, PGM 2, PGM 3, PGM 4 — When lit, assigns Program 1, 2, 3, or
4 to the Control Room outputs. The Program buses are digital sources.
TELCO REC — When lit, assigns the Telco Record output to the Control Room
outputs. This is an analog source.
TELCO MON — When lit, assigns the Telco monitor mix to the Control Room
outputs. This is an analog source.
TALKBACK Volume Pot — Controls the level of the dedicated Talkback
output.
CUE Volume Pot — Controls the level of the dedicated Cue output.
L & R MODE — These buttons set the monitor mode (stereo or mono) for both the
monitor speakers and headphones. When both buttons are unlit, the outputs are
stereo. When the L (left) button is lit, the left input feeds both the left and right outputs.
When the R (right) button is lit, the right input feeds both the left and right outputs.
When both L and R buttons are lit, the left and right inputs are summed into a
mono mix to feed both the left and right outputs.
CONTROL ROOM MODULE QUICK GUIDE
This module has the control facilities for the console operator, including monitor
source selector buttons, talkback and cue level controls, mode selector buttons and
fader control of the monitor speaker and operator headphone outputs.