Revision B • 1/03
H
A
R
R
I
S
C
O
R
P
O
R
A T
I
O
N
1-5
1 General Information
Monitor Outputs
Output Source Impedance:
<3 ohms, balanced
Output Load Impedance:
1 k ohms minimum
Output Level:
+4 dBu nominal, +24 dBu maximum
Frequency Response
Microphone or Line Input to Program or Send Output:
+0 dB/-0.5 dB, 20 Hz to 20 kHz
Dynamic Range
Analog Input to Analog Output:
105 dB referenced to
FSD, 108 dB “A” weighted to FSD
Analog Input to Digital Output:
109 dB referenced to
FSD
Digital Input to Analog Output:
107 dB referenced to
FSD, 110 dB “A” weighted to FSD
Digital Input to Digital Output:
138 dB
Equivalent Input Noise
Microphone Preamp
:
-127 dBu, 150 ohm source
Total Harmonic Dist Noise
Mic Pre Input to Mic Pre Output:
<0.005%, 20 Hz to
20 kHz, -38 dBu input, +18 dBu output, 100k
ohm load, 22 kHz filter bandwidth
Analog Input to Analog Output:
<0.003% at 1 kHz,
+18 dBu input, +18 dBu output, 100 k ohm
load, 22 kHz filter bandwidth
Digital Input to Digital Output:
<0.00016%, 20 Hz to
20 kHz, -20 db FSD input, -20 db FSD output,
20 kHz filter bandwidth
Digital Input to Analog Output:
<0.003% at 1 kHz,
-6 db FSD input, +18 dBu output, 100 k ohm
load, 22 kHz filter bandwidth
Crosstalk Isolation
Program-to-Program or to-Program or to-Send:
>95 dB,
20 Hz to 20 kHz
A Input to B Input, B Input to A Input:
>110 dB, 20 Hz
to 20 kHz
Stereo Separation
Analog Program Outputs:
>86 dB, 20 Hz to 20 kHz
Console Power Requirements
Fully configured
Legacy-14
:
185 watts at 115/230
VAC, ±12%, 50/60 Hz
Fully configured
Legacy-22
:
250 watts at 115/230
VAC, ±12%, 50/60 Hz
Fully configured
Legacy-30
: 285 watts at 115/230
VAC, ±12%, 50/60 Hz
Power Supply Voltage
Console power:
+48 VDC at 8.34 Amp, redundant
operation optional
Power Supply Ground
Rack-mount power supply frame:
grounded through
AC cord
Power Supply Connection
AC input:
IEC power cord
DC output:
two keyed multi-pin connectors
Dimensions
Legacy-14
:
9.75
"
x 41.13
" x 33.38" (H, W, D)
Legacy-22
:
9.75
"
x 54.44
" x 33.38" (H, W, D)
Legacy-30
:
9.75
"
x 67.24
" x 33.38" (H, W, D)
Power Supply (Rack-mount power supply frame):
3.5
"
(2 RU) x 19.0
" x 16.0"
(H, W, D)
Harris Corporation reserves the right to change
specifications without notice or obligation.
Summary of Contents for Legacy 99-1300-0
