Harris Legacy 99-1300-0, Operation & Technical Manual

Page: 44 / 98

Revision B • 1/03
H A R R I S C O R P O R A T I O N
2-32
2 Installation
QUICK GUIDE TO THE CONTROL ROOM MODULE
There are thirteen connectors on the Control Room module: five 6-pin analog audio input connec-
tors, six 6-pin analog audio output connectors, one 14-pin logic connector, and one 8-pin logic connec-
tor. The connectors are hidden by the meter panel in normal operation.
INPUTS
EXT-1, EXT-2, EXT-3, EXT-4, CUE IN — The 6-pin analog inputs
accept stereo signals or mono signals from up to four external sources and
a cue source. When a mono signal is connected, parallel the signal to the
left and right input pins.
OUTPUTS
MONITOR, OPERATOR, CO-HOST, GUEST, CUE, TALKBAC K
—
The 6-pin balanced stereo analog outputs are wired using the standard
pinout sequence.
LOGIC
LOGIC — This 14-pin connector has the warning light control output,
remote inputs for C/R mute and dim, and control outputs for talkback,
mute, and dim indicators. For more information, see pages 2-34 & 2-35.
CUE CNTL — This 8-pin connector has an external cue control input.
For more information, see page 2-36.
Right High (+)
Right Low (-)
Shield
Left High (+)
Left Low (-)
Shield
High (+)
Low (-)
Shield
Analog Inputs - Stereo
3
2
1
6
5
4
(wire insertion end view)
Analog Inputs - Mono
High (+)
Low (-)
Shield
3
2
1
6
5
4
(wire insertion end view)
Analog Outputs
Right High (+)
Right Low (-)
Shield
Left High (+)
Left Low (-)
Shield
3
2
1
6
5
4
(wire insertion end view)