Chapter 10 Unit Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved.
289
Ellipse 3000 Release 3.0, Rev. B
SNMP Traps Sub-Menu
10.4.4.1
Adding and Editing a New Trap-Destination Entry
The SNMP Traps Explorer-window presents a new
Add New
button. This button gives the user a
new trap-destination entry with each click.
Upon first accessing the
SNMP Traps
window, the Explorer window displays only the
Add New
button. Click the button to add a new destination entry.
The new trap-destination entries are organized in a column-list. Each entry is identified in the list
according to its trap-destination host’s name and Ethernet information (IP address and UDP port).
Clicking any entry displays the entry’s configuration section (see
The new entry is set with default values for the configuration parameters. The user must access
the entry and set its mandatory parameters, IP Address and UDP Port, to register the new trap
destination host.
NOTE:
The default values are not configured according to the user's network; therefore the values are not
compatible as trap-destination host values.
Thus, adding a new entry will not create the destination host; the user must set the accurate values according
to the user's network.
10.4.4.2
Drop a Trap-Destination Entry
Each entry in the list also displays a
Delete
button, to the right of the entry.
This button immediately drops the entry from the trap-destination hosts’ list.
