Harmonic Ellipse 3000, User Manual

Page: 244 / 403

© 2013 Harmonic Inc. Harmonic All rights reserved. 244 Ellipse 3000 Release 3.0, Rev. B
Chapter 9
Input Interface Configuration
The Inputs configuration sub-menu/tab enables you to set the input interface parameters and
defines input interfaces for a given input signal (ASI, IP or Serial) on the Ellipse Series of
Contribution Encoders.
9.1 General
The Input Interface menu contains the following sub-menus (see Figure 9–1):
■
ASI Input Menu – Allows setting the DVB-ASI input interface parameters
(see 9.2 DVB-ASI Input ).
■
IP Input Menu – Allows setting the IP input interface parameters (see 9.3 IP Input Menu (MPE
input) ).
■
Serial Input Menu – Allows setting the serial input (low speed data, LSD) interface parameters
(see 9.4 Serial (Low Speed Data) Input Menu ).
Front Panel
To set the Inputs parameters on the front panel:
❖
Navigate
Root > Configuration > Inputs
(see the following example).
Web Manager
To access the Input Interface menu in the Web Manager:
❖
Select the
Inputs
tab.
Inputs
1 ASI Input
2 IP Input
3 Serial Input