Harmonic ELECTRA VS, User Manual

Page: 479 / 604

Chapter 7 ’Tools’ — HP Monitoring Tools (6RU and 10RU Devices)
Electra VS - Version 05.10 479
User Manual - Rev. A
Figure 7-15. Accessing the HP Virtual Connect Manager interface
3. Enter the user name and password of the interconnect bay and click
Sign in .
Configuring the Interconnect Bays
Interconnect bays are delivered with a default configuration. If you need
to modify it, read the information below.
The Electra VS product requires an internal system network for
communication between the blades. This network must be linked to the
first interface of each blade. You must perform the first IP configuration
via this network.
Once you are logged in, perform the following global steps:
1. In the Ethernet networks category, define the LANs.
2. Assign the LANs to the output ports.
3. Modify the server profiles so that they see these networks.
When your configuration is complete, connect the Ethernet cables to the
interconnect bays.
Saving your Configuration
When your configuration of the interconnect bays is complete, you may
want to save it to a file for backup purposes. To do so:
1. From the HP Management Console, in the tree menu on the left, under
Domain Settings , choose Backup/Restore .