Harmonic ELECTRA VS, User Manual

Page: 381 / 604

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS - Version 05.10 381
User Manual - Rev. A
Use the condition editor to perform your configuration. For our example,
set the condition of the
Choice processing component as shown below.
Figure 3-329. Example of condition configuration for a Choice processing component
Selector
The Selector tool lets you define a condition to choose the input that
should be used. It works basically the same way as the Choice tool, but
reversely.
Let us take an example: a configuration contains two inputs: one TS over
IP input#1 and one TS over IP input#2. We want the job author to choose
whether to use one input or the other. We thus use the
Selector tool, as
shown in Figure 3-330 .
Figure 3-330. Example of use of the Selector tool