Harmonic ELECTRA VS, User Manual

Page: 205 / 604

Chapter 3 ’Web User Graphical Interface’ — GUI Description
Electra VS - Version 05.10 205
User Manual - Rev. A
The contents of input for the selected job is showed in a tree (available
for jobs that include a TS file input or a TS over IP input only).
Job Nodes
Figure 3-168. Job Nodes view
This panel indicates the node(s) where the job is running.
The following information is provided for the selected job:
 Node id : nodes used by the main and backup jobs if the job is
redundant
 State : state of the node(s)
 Status : status of the node(s). See Table 3-1 ’Status pictograms’ on
page 90
 Description : node(s) description
 Job id : Identifiers of main and backup nodes if the job is redundant
Job Redundancy
This view is displayed if the selected job is a redundant job.
Figure 3-169. Job Redundancy view
This panel indicates the status of the selected redundant job.
The following information is provided:
 Automatic switch-back : Status of the SDI redundancy mode. SDI
redundancy mode must be set in the Hardware/SDI panel. Refer to
section
’SDI Redundancy Mode’ on page 189.

Job name : name of the job
No redundant SDI job
Redundant SDI job
Active job is highlighted