Harmonic ELECTRA VS, User Manual

Page: 136 / 604

Chapter 3 ’Web User Graphical Interface’ — Operating Instructions (Tutorial)
136 Electra VS - Version 05.10
User Manual - Rev. A
2. Perform the settings described in the table below.
3. Apply the configuration.
Table 3-4. Settings to perform to encode a file
Processing
component
Parameter Action
TS file
input TS file network
storage Set the default value and set to public
TS file folder Set the default value and set to public
TS file name Set to public, label = "Input TS
filename"
TS video
extractor Maximum format Set to HD 1080i@25 fps
Program number Label = "Input PN"
PMT PID Label = "Input PMT PID"
Component PID Label = "Input video PID"
Codec Set to Any
H.264 AVC
encoder Bitrate Set to public, label = "Output video
bitrate"
Profile Set to High
Frame structure Set to Interlace , public
TS audio
extractor Program number Set to First one
PMT PID Set to Auto
Component PID Label = "Input audio PID"
Codec Set to Any
MPEG-1
Layer 2
encoder Bitrate Set to public, label = "Output audio
bitrate"
Stereo mode Set to Stereo
TS
multiplexer TS bitrate Set to 2,500,000 bps, public, label =
"Output TS bitrate"
TS
multiplexer
(input 1) Component PID Make a link to "Input video PID"
a
a
To know how to make links between parameters, refer to section ’Link
Tool’ on page 236.
PMT PID Make a link to "Input PMT PID"
a
TS
multiplexer
(input 2) Component PID Make a link to "Input audio PID"
a
TS file
output TS file network
storage Set the value
TS file folder Set the value
TS file name Make a link to "Input TS filename"
a