Harmonic ELECTRA VS, User Manual

Page: 336 / 604

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
336 Electra VS - Version 05.10
User Manual - Rev. A
In the Input tab, set the following parameter:
 Input type : see the Input: Input tab of TS Multiplexer processing
component (see section ’TS Multiplexer’ on page 327).
 Controlled by statmux (for video only):

If set to false the video component is in CBR mode.

If set to true , the video component will be driven by the statistical
multiplexing mechanism. You have to set the following parameters.
 Minimum bitrate (TS overhead included) : indicate the
minimum bitrate that the video component should have.

Maximum bitrate (TS overhead included) : indicate the
maximum bitrate that the video component should have.
 Quality : set the picture quality level required, in percentage.
The value must be between 30 and 90% (best quality). Default
value: 70%.
If SDT generation is requested (i-e Generate SDT set to true above), fill
in the following fields:

Service type: service type of the program: Digital television service (1) ,
Digital radio sound service (2) , Mosaic service (6) .
 Service name: program name of the program

Provider name: provider name of the program