Harmonic ELECTRA VS, User Manual

Page: 297 / 604

Chapter 3 ’Web User Graphical Interface’ — Workflow Library
Electra VS - Version 05.10 297
User Manual - Rev. A
- Enter the complete server path using the following syntax:

[CIFS|NFS]://login:password@[IP adress | hostname]/MyDirectory


Using this second method we assume that the network storage is
accessible from all the nodes of the Electra VS (no IP address or
hostname verification is done before launching the job, therefore if
the server is not accessible from the node the reception of the file will
fail)

If you enter a hostname, a DNS lookup will be performed every 30
seconds to check that the resolution of the IP address has not changed.
 Text file folder : folder on the network storage where the text
file is stored.

Text file name : name of the text file. Note that any
modification of the file is immediately reflected on the insertion.
If the file is empty, there is no insertion. If the file is missing,
there is no insertion. If the storage is unreachable (network
problem, for example), the last insertion persists (a job
stop-start clears the insertion).
 File encoding type : encoding type of the text file. If the text
file type is not supported, the file must be converted to an
available type.

Raise a log when text file is absent : if set to true , an alarm
is raised if the file is missing. You should set this parameter to
false if you want to control the apparition or disappearance of
text by presence or absence of text file.
If you select to enter directly the text in the configuration (Manual) you
must set the following parameter:
Figure 3-270. Video overlay parameters - Text insertion - Manual editing
 Text content
: enter the text to display.
In both cases you have to define the text font, transparency, color, stroke,
and whether the text is scrolling or is static