Harmonic ELECTRA VS, User Manual

Page: 200 / 604

Chapter 3 ’Web User Graphical Interface’ — GUI Description
200 Electra VS - Version 05.10
User Manual - Rev. A
By right-clicking on the titles of column or by click on , it is possible
to select the columns that will be displayed or hidden.
Figure 3-160. Jobs list array
For each job, the following information can be provided:
 Logs: if checked the logs of the job will be displayed in the Logs tab.
Refer to section ’Logs Tab’ on page 208.

Job id (Main/Backup) : identifier of the main and backup jobs.
These identifiers are automatically created. Active jod are in bold.
 Job name : at your convenience. You can modify it in the job
parameters.
 Alarm status (Active Job) : alarm status of the active job. List of
possible status and their meaning is provided in Table 3-1 ’Status
pictograms’ on page 90.
 Backup is active : if checked indicates that the backup job is active.
This column allows to see at first glance all the redundant job with
backup active.

Activity status (Main/Backup) : state of the main and backup jobs.
See section ’State’ below.
 Workflow : workflow on which the job is based.

Alarm status (Main/Backup) : alarm status of the main and backup
jobs. List of possible status and their meaning is provided in Table 3-1
’Status pictograms’ on page 90.
 Source : user who created the job.
 Progress : for offline jobs only, indicates the progress percentage of
the job.
No redundant job Redundant job
Right-click to select the
information displayed